Recommended pressing instructions
Follow our recommended steps to achieve the best results with your DTF transfers.
Our Pressing Recommendations
Every press can vary slightly from temperatures, however we have devised the following steps below to ensure you get the best results when using our transfers
- Set a medium to heavy pressure on your press.
- Ensure your press is set to 135 / 140 degrees and temperature has been fully reached before pressing.
- Pre-press your garment for 5 seconds to remove any moisture.
- Place your DTF transfer onto the garment, and cover with a teflon sheet first. Press for 12 seconds.
- Instant hot peel film allows you to remove your graphics straight away. Make sure you do this QUICKLY and in one motion. Make sure you keep your hand low to the garment then quickly and confidently "whip" the film off.
- Re-apply the silicone sheet and carry out a second press at 135 / 140 degrees for 6 seconds.
